CAT 740 ARTICULATED TRUCK - 40 TON (2006) - Unit #T6960
Machine Hours: 6528 Hours - ECM Idle Hours: 2827

Upon arrival to our yard, this unit was serviced and checked over.

All filters including engine, transmission and hydraulics were cut open and checked for any sign of contaminates. They were all clean.

All three differentials and the six wheel planataries were all checked and were also clean.

Following is a list of repairs completed by Marcel Equipment Limited at 6528 hours:

Replaced the starter mounting seal.

A NEW fan pump seal was installed.

Replaced rear view mirror.

Repaired the seat suspension.

Installed NEW lower articulation pin and bearings.

Repaired the wiper assembly.

Checked all the lights, back up alarm and brake lights for proper operation.

NEW pins and bearings were installed on the left rod end of the steering cylinder.

NEW hoist cylinder bearing installed on the left hand side.

A NEW lower hoist cylinder bearing was installed.

Repaired rear wiper assembly.

Installed a NEW radio.

Installed NEW tailgate pins and bearings.

Checked all the grease lines and they were good.

Resealed the hoist hydraulic pump.

Installed NEW hydraulic tank sight gears.

Installed a NEW turbo pressure line.

This is a good, ready to work truck.