Machine Hours: 8854 Total Machine Neutral Time: 2533 Hours

Price: Call for details
  • Caterpillar C15 ACERT Engine
  • Engine Block Heater
  • Powershift Transmission
  • Auto Reverse Cooling Fan
  • Cab (ROPS) with Air Conditioning
  • Cab air filtration system
  • Differential Steer
  • 26" Trapazoidal Track Shoes
  • CAT Semi U Blade with Tilt and Trash Rack
  • Rear Striker Bar with Counterweight and Drawbar
  • Ripper Control
  • Winch and Rippers are also Available
  • Factory Waste Handling Arrangement
  • Clamshell Final Drive Guards
  • Pivot Shaft Seal Guards
  • Turbine Pre-Cleaner
  • Debris Resistant Radiator
  • Fuel Tank Guard
  • Heavy Duty Bottom Guards
  • Fast Fuel Adapter
  • High Speed Oil Change
  • Flood Lighting Package
  • Lights, Wipers, Heater, Mirror
  • AM/FM Radio, Beacon Lamp
  • CAT Dealer Serviced and Maintained Since New - Records are Available
  • Rated at 348 HP.
  • Approximately 86,000 LBS.

Repair / Condition Report

Upon arrival to our yard, all covers and guards were removed and unit was powerwashed.

Visual and operational inspections were completed.

Unit was serviced and all filters were cut open and checked for contaminates.

Engine oil was changed and filter was clean.

Transmission oil was changed and filter was clean.

Hydraulic filter clean.

Both final drive oil levels were good and oils were clean and final drive magnetic plugs were clean.

Serviced engine.

Serviced HVAC system complete.

Replaced condenser fan motor.

Replaced heater core lines.

Resealed blade lift cylinders.

REBUILT transmission pump due to leak between sections.

Installed NEW bearings on both lift cylinder mounting caps.

Replaced all air conditioning hoses and installed NEW AC dryer.

Checked all gauges, controls and lights.

Replaced all required hydraulic and transmission hoses.


Oil pan gasket was seeping oil. We took this opportunity to roll NEW main bearings - standard size CAT.

Installed NEW rod bearings - standard size CAT.

Installed NEW thrust bearings - CAT.

Installed REBUILT turbo charger.

Installed all NEW exhaust manifold studs.

Installed NEW exhaust manifold gaskets.

Installed NEW exhaust wrap.

Installed six REBUILT fuel injectors.

Completed engine valve set.

Completed injector set.

The following pressure checks were done to ensure they are within OEM spec:

- Torque Outlet

- Torque Inlet

- Transmission Lube

- Brake Pressure

- High Pressure Cut Off

- Steering Left

- Steering Right

This is a work ready machine.

It will soon enter our paint facility where it will be sandblasted, primed, painted and detailed.