Machine Hours: 4474 - ECM Idle Hours: 1254

Price: Call for details
  • Caterpillar C9.3 ACERT Engine
  • Engine Block Heater
  • Powershift Transmission
  • Cab (ROPS) with Air Conditioning
  • Differential Steer
  • Pressurized Cab Filtration System
  • Waste Handling Arrangement
  • NEW 24" SBG Pads with Trapezodial Holes
  • NEW sprocket segments
  • Final Drive Seal Guards
  • Heavy Duty Bottom Guards
  • CAT SU Blade with Trash Rack
  • Automatic Reversing Fan
  • Rearview Camera
  • Rear Protection Screen
  • Rear Striker Bar Assembly
  • Fuel Tank Guards
  • Fast Fuel
  • Flood Light Arrangement
  • Heated Seat
  • Lights, Wipers, Heater
  • AM/FM Radio, Amber Safety Light
  • Rated at 210 Net HP.
  • Approximately 53,000 LBS.

Repair / Condition Report

Upon arrival to our yard, all covers and guards were removed and unit was power washed.

Visual and operational inspections were completed at 4474 hours.

Local CAT dealer performed the following:

Performed inspection.

Download PSRPT.

Changed engine oil and filter.

Changed all other filters on machine.

Cut open and inspected all filters, no metal found.

Changed trans breather, hyd tank breather and fuel cap breather.

Changed ARD head spark plug.

Checked final drive and pivot shaft oil.

Tested batteries.

Ran fuel system verification test.

Ran DPF regen.

Flashed all ECMS that needed it.

Finished TA1 inspection.

Performed TA2 pressure check.

Replaced coolant heater hoses from engine to cab.

Replaced rear track guides.

Installed NEW track pads.

The following are repairs completed by Marcel Equipment:

Replaced hose for pre-cleaner.

Replaced blade tilt pins and bearings.

Replaced master switch.

Replaced sprocket segments. 

Resealed blade lift cylinders.

Installed NEW bearings on lift cylinders.

Checked all grease points and grease machine.

Checked air conditioning and heater.

Checked all gauges, switches and controls for proper operation.

This is a low hour well maintained unit that is ready to work.