Machine Hours: FRAME HOURS: 12,025

Price: Call for details
  • Caterpillar C15 ACERT Engine
  • - REBUILT Engine
  • - REBUILT Torque
  • - REBUILT Transmission
  • - REBUILT Transfer Case
  • Complete Machine Reconditioning by Marcel Equipment
  • Engine Block Heater
  • Powershift Transmission
  • Automatic Reversing Fan
  • Command Control Steering
  • Deluxe Cab (ROPS) with A/C
  • Wheel Options are Available
  • CAT Straight Landfill Blade
  • Front and Rear Striker Bars  
  • Swing Out Steps
  • High Speed Oil Change 
  • Front Window Guard 
  • Lights, Wipers, Heater
  • Rated at 401 HP.
  • Approximately 82,000 LBS.

Repair / Condition Report

This unit was put through Marcel Equipment’s Rebuild and Reconditioning Process.

The following work was completed to the machine;

Machine was disassembled and stripped down to frame.

All NEW fluid hoses were installed in frame (fuel, hydraulic, transmission)

Disassembled cooling assembly and sent all out for pressure testing and cleaning.
Reassembled with all new seals and hoses.

Inspected driveline and install NEW U-joints.
Installed NEW bushings on front lift cylinder yoke

Disassembled hydraulic tank, cleaned and resealed.

Disassembled and cleaned brake valves on hydraulic tank – resealed and reassembled

Install NEW bushings and seals on rear axle oscillation

Removed fuel tank and cleaned

Installed all NEW or REBUILT hydraulic pumps and motors

Disassembled hydraulic oil cooler/fan valve, installed all NEW valves, seals and coil

Installed NEW machine wiring harness with all NEW clamps

Disassembled steering pilot valve, cleaned and resealed

Installed NEW harness in relay panel at the back and NEW breakers

Installed 4 NEW batteries and all NEW battery cables, master switch and boosting connection


Rebuilt Engine with all Cat OEM Parts

Installed REBUILT turbo and injectors NEW breakers

Mag and polish camshaft and crankshaft

Mag and clean cylinder block

Installed all NEW wiring harnesses

Installed all NEW sensors

All NEW bearings installed throughout engine

Installed NEW exhaust wrap

Installed Cat cylinder packs

Installed REBUILT water pump

REBUILT alternator

NEW a/c compressor

Installed NEW air filter housing

Installed NEW ether injection system


REBUILT transmission with NEW bearings and seals

Installed NEW valves and harnesses

REBUILT transfer case with new bearing and seals

Disassembled and cleaned transmission filter housing

REBUILT transmission pump

Cleaned power train oil tubes and installed new hoses

REBUILT parking brake assembly

Installed NEW parking brake actuator


Cab was refurbished completely

NEW floor and headliner

Harnesses were inspection and reconditioned.

REBUILT seat suspension

NEW seat compressor, arm rests, bottom cushion

Cleaned and resealed EVAP and heater core and all ducts

New monitor gauge cluster

Installed NEW steering wheel.

Rebuilt throttle pedal

Installed NEW switches

Rebuilt joystick control

NEW cab pressurizer harness and a/c harness

Installed NEW glass where required


Once machine was back together, complete machine testing was completed.
All engine, transmission, and hydraulic pressures were taken to ensure they are with OEM spec.

Complete machine has been sandblasted, primed and painted with quality products and NEW decals applied.