This 816 has been through our “Marcel Reconditioning Process":

The following repairs & servicing have been completed:

• Remove all panels and belly pans for complete machine cleaning.
• Completed visual & operational inspections
• Changed engine oil & filter 
• Filter was cut open & checked for contaminants - clean
• Changed transmission oil & filter, filter cut open & checked – Filter clean – Trans leaking between sections.
• Checked suction screens - Clean
• Changed hydraulic filter, filter checked - filter clean - changed oil
• Changed fuel filter 
• Checked Differential Oils - changed oils after repairs completed
• Checked rear axle oscillation – Loose
• Checked center articulation - good
• Checked engine high & low idle
• Checked torque converter stall speed
• Checked all transmission pressures
• Checked all hydraulic pressures

Our Shop then Completed all Needed Mechanical repairs as follows:

• Disassembled machine to complete all Needed repairs.
• Disassembled Transmission, inspected and Resealed
• Replaced Transmission mounts
• Rebuilt Rear Axle oscillation
• Rebuild hydraulic fan pump
• Rebuild implement pump
• Rebuild transmission pump
• Rebuild steering pump
• Rebuild fan motor
• Replaced front blade cylinder mount bushings and hoses
• Replaced fuel line from tank to pump
• Cleaned fuel tank
• Repaired any electrical switches and wiring
• Checked Alternator
• Load tested Batteries
• Repaired all grease lines
• Replaced engine fan belt and tensioner
• Checked and adjusted all system pressures
• Repaired all oil leaks
• Replaced all damaged or leaking hoses
• Resealed brake valve
• Removed Cab for Reconditioning
• Replaced corroded panels with New metal
• Installed NEW Suspension Seat
• Replaced Cab cracked glass
• Replaced damaged Cab insulation panels
• Tightened Controls
• Serviced A/C unit
• Repaired and Fitted all Belly Pans
• Repaired all sheet metal panels, steps, railings and grab handles
• Reassembled machine
• All Needed Repairs & Servicing has been Completed.
• Complete machine will be Sandblasted, Primed, Painted and New Decals applied.

The following are repairs completed by CAT Dealer prior to Marcel Equipment owning this Caterpillar 816F Series II:

At 8,648 hours, installed NEW engine ECM

At 8,562 hours, CERTIFIED POWERTRAIN REBUILD was completed

• Rebuilt engine
• Rebuilt torque
• Rebuilt transmission
• Rebuilt transfer case
• Rebuilt axles
• Recondition rear axle trunnion mounts
• Reconditioned driveline
• Reconditioned parking brake
• Reconditioned rad group
• Reconditioned wiring harness
• Reconditioned fuel supply/return lines
• Replaced drivetrain hoses

Please contact Mark or John for further information on this Caterpillar 816F Series II Landfill Compactor.