When unit arrived in our yard, MEL completed the following:

• Removed all panels from machine and power washed
• Completed thorough machine inspection
• Complete Machine Service
• Cut open, inspected and replaced all oil filters (Engine, Transmission, Hydraulic) & inspected for contaminates - All clean
• Serviced Fuel system
• Replaced Engine, Transmission, Hydraulic Oils
• Inspect all magnetic plugs/screens & suction screens- all clean
• Check differential & planetary oils - levels & condition are good

Completed the following pressure checks to ensure within OEM spec:

• Engine rpm high & low idle
• Engine oil high & low idle pressures
• Fuel pressure
• Full stall boost
• Stall speeds - single / double
• Boost - single / double stall
• Transmission pump pressure / lube pressure
• Torque inlet / outlet pressures
• Lock-up & Impeller clutch pressures
• Steering pressure checks
• Main relief pressure
• Front / Rear brake pressures

Based on inspection, MEL has completed the following repairs:

• Replaced bent front left Control Arm & pins & bushings
• Replaced front Steering Bar pins & bushings
• Replaced Frame Link pins & bushings
• Replaced Rear Suspension Boots
• Replaced Differential Support / Dog Bone pins & bushings
• Replaced upper Pins & Bushings on both Rear Shocks
• Replaced Upper Pins & Bushings on both Hoist Cylinders
• Replaced front Traction Bar Boots
• Turbo Impeller damage - Installed Rebuilt Turbo
• Installed NEW Turbo gaskets, Crush washers & Exhaust rings
• Installed NEW Seat
• Checked all Brakes for wear & operation - All Good
• Replaced several Rear wheel studs
• Checked Auto greaser operation
• Confirmed grease is getting to all distribution blocks
• Inspected all grease lines - all pins & joints getting grease
• Repaired leaking Rear Suspension Cylinder valve core
• Cleaned Starter terminals
• Check Fan hub & tensioner pully - grease
• Cleaned Axle & Transmission breathers
• Replaced Rear brake breather tubes
• Cleaned Hydraulic tank breather
• Replaced worn Box Pads
• Replaced Transmission suction tube coupler & seals
• Repaired all misc Cab & Accessory wiring
• Repaired all Lights and wiring
• Check for & Repaired all machine leaks
• All Cosmetic & Welding repairs completed
• All Steps, Railings & Grab handles straight & in place.
• Box Bed was inspected. It is Lined and in Very Good Condition
• All Needed Repairs & Servicing has been Completed.

This truck is Work Ready.